On Big Discount Fluke 25501009 TS25D Test Set With ABN Cord in USA
>You are lucky if you search a LCD LED TV and it Accesories, this Fluke 25501009 TS25D Test Set With ABN Cord will be a lot of benefit to us and many helpful that you can take from these products to facilitate our work, a lot of the pleasure we make with this product, it will even be happy if we give this product as a gift to a loved one.
FEATURES
- Detects dial tone and polarity, places and receives calls, indicates line voltage and current, and has a one-way amplified speaker for hands-free listening during testing of telephone lines
- Built-in tone generator for wire identification
- Caller-ID and Call Waiting Caller-ID
- Monitors lines without disrupting service, remaining on hook if data is detected, and stores up to ten 23-digit numbers which can be speed-dialed via the keypad
- Keypad has standard dialing keys and function keys, plus a large LCD for viewing test status
DESCRIPTION
The Fluke Networks TS25D telephone test set, available with various line cord connectors to suit specific applications, is designed for indoor testing of telephone lines to detect dial tone and polarity, make and receive calls, and indicate line voltage and current; has a one-way, adjustable-volume speaker for hands-free listening during testing and a built-in analog tone generator that sends a signal through wires for locating and tracing wires with a probe (sold separately); monitors lines without disrupting service and remains off hook if data is detected; and stores up to ten 23-digit telephone numbers which can be speed-dialed via the keypad. The test set provides tone or pulse operation, detects caller ID and call-waiting ID, and tests continuity to detect short circuits. It has two basic modes of operation: talk mode for off-hook operations including verifying dialing and receiving calls, and monitor mode for on-hook operations including checking for an idle line, listening for line noise, measuring DC voltage on the line, and capturing DTMF (dual-tone multi-frequency) tones to check for proper signaling. In monitor mode, the test set provides a high impedance coupling to monitor lines without disrupting service. When switching to talk mode, the data lockout feature tests the line for high-speed data signals and remains on hook and beeps if such signals are detected. The lockout can be overridden to pull dial tone from a noise line. The keypad has 12 standard dialing keys including star and pound, and function keys to redial numbers, adjust speaker volume, and navigate menus, among other functions. The LCD displays icons for test status such as indicating normal or reversed DC polarity, and displays readings of voltage from 0 to 250 VDC when on-hook and current from 0 to 110 mA when off-hook. The test set can be programmed to turn off automatically after 30 or 60 minutes (default setting is 60 minutes) of inactivity to conserve battery life. Additional specifications include various environmental operating conditions. Telephone test sets, also called butt sets, are used by telecom technicians to troubleshoot and maintain copper-wire voice-subscriber lines.
| Specifications | |
|---|---|
| Line current range | Off-hook: 10 to 100 mA |
| DC resistance | Off-hook: 150 Ω (nominal); on-hook: greater than 1 MΩ |
| AC impedance | Off-hook: 600 Ω (nominal), 300 to 3400 Hz; on-hook: greater than 120 kΩ, 300 to 3400 Hz |
| Rotary dial pulse rate | 10 + or – 1 pulses per second |
| DTMF (dual-tone multi-frequency) tone frequency error | + or – 1.5% maximum |
| Memory capacity | Ten 23-digit speed dial numbers, one redial number |
| Agency certifications and standards met | CE (European Conformity) marking |
| Power source | Shared line power; 9V battery (included) |
| Dimensions | 20 x 6.8 x 4 cm/7.8 x 2.7 x 1.6 in (H x W x D) |
| Weight | 284 g/10 oz |
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Datacom and telecom installation and test devices, such as toners and test sets, check cabling and wiring to help ensure proper connections and operation. Tone generator and probe sets, also called toners, are used to locate, trace, and isolate cables in copper media networks. Telephone test sets, also called butt sets, are specialized telephones that connect to telephone lines to check for proper operation and to isolate trouble. Some test sets incorporate a TDR (time-domain reflectometer) and toner for determining cable length and locating faults. While certain devices may be used on live networks, others are only suitable for inactive networks. Field technicians and installers use these devices to set up, maintain, and troubleshoot datacom and telecom cabling within a building or in outside plant (OSP) applications.
What's in the Box?
- Fluke Networks TS25D telephone test set
- Test leads with Angled Bed-of-Nails Clips
- 9V battery
- Instructions
What people said..? about Fluke 25501009 TS25D Test Set With ABN Cord
With all the explanations above, the features, Spesification and benefits that you can take out of this Fluke 25501009 TS25D Test Set With ABN Cord we hope your problem quickly overcome. Take advantage of special offers today with a big discount even free shipping for a certain area, then immediately buy products before prices change or you run out stock.
Store List Price: $ 192.99
No comments:
Post a Comment