On Sale Today 3 Axis CNC Kit 13Nm Nema 34 Stepper Motor & MA860H Driver CNC Plasma Laser Lathe in USA
>
You might've been looking for this 3 Axis CNC Kit 13Nm Nema 34 Stepper Motor & MA860H Driver CNC Plasma Laser Lathe to be purchased, by explaining reviews feature of this product we are proud to offer the reviews of people have got the benefits of this product to you the ease of purchasing process, get free shipping and even a big discount so you get the benefits of the product this but save your money.
FEATURES
- 3 x MA860H Stepper Motor Driver Max 80VAC or 110VDC with 2.4-7.2A
- 3 x High Torque/Speed Nema 34 CNC Stepper Motor 13Nm(1841oz.in)
- 3 x Switching Power Supply 350W 60V 5.9A 115V/230V
DESCRIPTION
Stepper Motor 34HS59-5004S
Stepper Driver MA860H
* Supply voltage up to 80VAC or +110VDC
* Output current up to 7.2A
* Self-adjustment technology
* Pure-sinusoidal current control technology
* Pulse input frequency up to 300 KHz
* TTL compatible and optically isolated input
* Automatic idle-current reduction
* 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
* Suitable for 2-phase, 4-phase motors
* Support PUL/DIR, CW/CCW modes
* Short-voltage, over-voltage, over-current, short-cicuit protection
* Power Supply S-350-60
* DC Output: 60V 5.9A
* Wave and Noise: 300mVp-p
* Inlet Stability: ±0.1%
* Load Stability: ±0.3%
* Efficiency: 86%
* Adjustable range for DC Voltage: 54.5V~67V
* AC Input Voltage: 93~132V/176~264VAC Slected by Switch
* AC Input Current: 3.6A/115VAC 1.8A/230VAC
* Working Temperature: -10~50°C
* Safety Standards: GB4943, UL60950, EN60950
* EMC Standards: GB9254, 55022
CNC Breakout Board ST-V2
* Maximum support 5-axis stepper motor driver controllers
* Compatible with MACH3, Linux CNC (EMC2) parallel-control CNC software
* Seperated USB power supply,peripherals powered phase and opto-isolated signals are to protect computer security
* 5-input interface to define the Limit, Emergence-Stop, Cutter alignment
* Wide input voltage range: 12-24V with anti-reverse function
* One relay output control interface, accessed by spindle motor or air pump, water pump
* Output 0-10V analog voltage for inverter to control spindle speed
* Input Voltage: USB port from PC or 12-24V power supply
* Drive type: Pulse, Direction Signal Control
* Suitable Microstep Driver: 2 Phase
What people said..? about 3 Axis CNC Kit 13Nm Nema 34 Stepper Motor & MA860H Driver CNC Plasma Laser Lathe
With all the explanations above, the features, Spesification and benefits that you can take out of this 3 Axis CNC Kit 13Nm Nema 34 Stepper Motor & MA860H Driver CNC Plasma Laser Lathe we hope your problem quickly overcome. Take advantage of special offers today with a big discount even free shipping for a certain area, then immediately buy products before prices change or you run out stock.
Store List Price: $ 505.00
No comments:
Post a Comment