In Stock Fluke 773 Advanced Milliamp Process Clamp-Meter in USA
>
You might've been looking for this Fluke 773 Advanced Milliamp Process Clamp-Meter to be purchased, by explaining reviews feature of this product we are proud to offer the reviews of people have got the benefits of this product to you the ease of purchasing process, get free shipping and even a big discount so you get the benefits of the product this but save your money.
FEATURES
- Digital clamp-meter for 24V loop circuits measures DC to 100mA via clamp and to 24mA in circuit, and DC voltage to 30V
- Meter can source and simulate DC signals from 4 to 20mA, can source DC voltage signals up to 10V, and is accurate to 0.2% with a resolution of 0.01mA
- Clamp with 4.5mm (0.177 inches) jaw opening measures current without touching or interrupting the circuit, and is for use in hard-to-reach applications
- Built-in 24V loop power supply to power a transmitter and measure its milliamp output signal
- Meets EN and IEC safety standards 61010-1 and 61010-2-032
- Dual backlit display with both mA measurement and percent of 4 to 20 mA span
- Measurement spotlight
- Measure up to 99.9 mA range non-contact
- Automatic power off
- 4 to 20 mA scaled output
DESCRIPTION
The Fluke milliamp process Digital clamp-meter is a manual-ranging meter for measuring DC milliampere (MA) and DC Voltage output signals of 24V loop circuits. It has a clamp that measures DC to 100MA. The clamp has two jaws that can close around an electrical conductor up to 4.5mm (0.177 inches) in diameter to measure current without touching or Interrupting the circuit, and has a 1 M extension cable so it can detach from the meter Body for hard-to-reach applications. A set of Test leads is included for measuring DC to 24MA and DC Voltage to 30V. The meter can source and simulate DC signals up to 20MA, can source DC Voltage signals up to 10V, and is accurate to 0.2 percent with a resolution of 0.01MA. It has an LCD that shows both milliamp readings and percent of 4 to 20MA span, and a backlight for visibility in low light that turns off automatically after two minutes. An LED at the top of the meter Body can be illuminated to aid visibility of wires in Dark enclosures. The meter features a built-in 24V loop power supply for powering a transmitter and measuring its milliampere output signal, and a scaled milliampere output for connecting to a logging device (sold separately) to record measurements. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. The unit operates on four 1.5V AA batteries, and turns off automatically after 15 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. The meter is manual-ranging, so the user selects the operating range for the property being measured. It meets IEC (international electro technical commission) Safety standards 61010-1 and 61010-2-032, has CE (European Conformity) marking, and complies with CSA (Canadian standards Association), and Australia N10140. The unit comes with a Soft carrying case.
What people said..? about Fluke 773 Advanced Milliamp Process Clamp-Meter
With all the explanations above, the features, Spesification and benefits that you can take out of this Fluke 773 Advanced Milliamp Process Clamp-Meter we hope your problem quickly overcome. Take advantage of special offers today with a big discount even free shipping for a certain area, then immediately buy products before prices change or you run out stock.
Store List Price: $ 1,299.99
No comments:
Post a Comment